To manually sync Arlo Ultra, Pro 3, or Pro 4
- Release the Arlo camera from the camera housing.
- Pull the camera out of the camera housing.
- Press the Sync button underneath your camera.
- Wait for your Arlo camera and SmartHub to sync.
- Check your Arlo camera’s live stream in the Arlo app to verify that the camera was synced.
How do you sync Arlo cameras?
Press the Sync button on top of the camera for about two seconds and then release the button. Note: Cameras must be synced one at a time. A blue LED on the camera blinks rapidly to confirm sync. If the LED on the camera blinks amber, the sync is not successful.
How do I pair my Arlo Pro 3 base station?
To connect your Arlo SmartHub or base station to the Internet:
- Connect the SmartHub or base station to your router using an Ethernet cable.
- Connect the power adapter to the base station and plug it into an electrical outlet.
- Turn the base station on by pressing the On-Off button.
Where is the sync button on Arlo Pro 3?
Press the Sync button on top of the camera for about two seconds and then release the button. A blue LED on the camera blinks rapidly to confirm sync. If the LED on the camera blinks amber, the sync is not successful. You must repeat the sync process.
Why is my Arlo camera not syncing with base station?
Check the battery status Low batteries can prevent your camera from syncing to the base station. If the battery is low, the battery icon is orange. To check if your camera’s battery status: Launch the Arlo app or log in to your account at my.arlo.com.
Why is my Arlo not connecting?
Make sure that your router is powered on. If the Internet LED lights solid amber, your base station is connected to your router, but is unable to connect to the Arlo cloud server. If the Internet LED lights green, perform a factory reset on your base station and try the installation process again.
How do I reset my Arlo Pro 3 camera?
Press and hold the sync button on the the camera for about 15 seconds, until the camera LED begins blinking amber, then let go. Note: If you have an Arlo Ultra (or newer) or Pro 3 (or newer) camera, you must release the camera from the camera housing to access the sync button.
Can I connect my Arlo base wirelessly?
No wireless option. The base needs to be connected by Ethernet cable to the router. No wireless option.
How do I know if my Arlo camera is on?
There is no indication the camera is on to a person looking at it exception is in dark if the night vision is enabled, then the IR LEDs glow a faint red.
Can you use Arlo cameras without base station?
You need a base station to connect Arlo Wire-Free and Arlo Pro Wire-Free cameras. You don’t need a base station to connect Arlo Q and Arlo Q Plus cameras. They connect directly to your Wi-Fi router.
How do you resync Arlo lights?
If your light still does not sync after trying these steps, try power cycling the light:
- Disconnect your Arlo Security Light’s AC adapter and remove the battery.
- Wait at least 20 seconds.
- Plug the light back in or reinsert the battery.
- Attempt to sync the light again.
Why is my Arlo camera blinking orange?
When a camera is flashing orange, this could mean that the battery level is low.
How do I sync my Arlo base station camera?
Bring your camera within one to three feet (30 cm to 100 cm) of the base station. Push the Sync button on the top of the camera and the Sync button on the side of the base station. Watch the front of the camera for a blue LED to blink rapidly, which confirms a successful sync.
How do I reconnect my Arlo camera after changing the battery?
Since you reset the base, your only choice is to remove all devices from Settings, My Devices and then use the Add Device button on the Devices tab. Add the base and then resync your cameras, using the brief press of the sync button.